Skip to main content

Posts

Volvo EC18 Electric Hydraulic Oil Return Filter Replacement Guide

This instruction show you guide on how to replace hydraulic oil return filter for Volvo EC18 Electric machine. Related Contents: Volvo PROSIS 2023 Volvo Vocom 88890300 Volvo Techtool 2023 Procedures: NOTE! Change the hydraulic oil filter after the first 50 operating hours, thereafter every 500 operating hours. 1.Carefully clean the hydraulic oil tank cap (1) and the area around it. 2.Loosen and screw out the oil tank cap (1) with a suitable tool.
Post a Comment
Read more
Recent posts

How to Remove and Install Sink Drain Assembly for Volvo VN770 Truck

This instruction show you guide on how to remove and install sink drain assembly for Volvo VN770 truck. Volvo Tech Tool 2022
Post a Comment
Read more

How to Remove and Install Air Heater for Volvo VN Truck

This instruction show you guide on how to remove and install air heater for Volvo VN truck. Volvo 88890300
Post a Comment
Read more

How to replace Heat Exchanger Seals for Volvo VN Truck

This instruction show you guide on how to replace heat exchanger seals for Volvo VN truck. Volvo IMPACT 2021 Procedures: 1.Remove the access cover. 2.Insert a screwdriver between the outlet flow cowl and the jacket casing. Carefully pry off the outlet flow cowl. 3.Tap a small drift through the pin. Volvo Tech Tool 4.Disconnect the connectors from the control unit. 5.Lift off the jacket casing. 6.Lift the heater out of the lower part of the jacket casing 7.Unscrew the attaching bolts that are located round the heat exchanger. 8.Lift off the fan. 9.Unscrew the flange (1) from the heat exchanger. Install new seals (2) and (3) 10.When assembling, use a new rivet. https://www.car-auto-repair.com
Post a Comment
Read more

Volvo VN Truck Air Heater Overheat Sensor Replacement Guide

This instruction show you guide on how to replace air heater overheat sensor for Volvo VN truck. Procedures: 1.Remove the access cover. Volvo 88890300 Adapter 2.Insert a screwdriver between the outlet flow cowl and the jacket casing. Carefully pry off the outlet flow cowl. 3.Tap a small drift through the pin. 4.Disconnect the connectors from the control unit. 5.Lift off the jacket casing. Volvo Tech tool diagnostic software free downlaod 6.Compress and lift off the holding clips 7.Disconnect the connector from the control unit and lift out the overheat sensor. Note: When replacing the overheat sensor use new holding clips. 8.When assembling, use a new rivet.
Post a Comment
Read more

Volvo VN Truck Air Heater Control Unit Replacement Guide

This instruction show you guide on how to replace air heater control unit for Volvo VN truck. Volvo Impact Free Download Procedures: 1.Remove the access cover. Volvo TechTool 2.Disconnect the connectors from the control unit 3.Lift up the locking lug and pull out the control unit. 4.When installing the control unit, make sure that the wiring harness is not pinched.
Post a Comment
Read more

Volvo VN Truck Air Heater Glow Plug Screen Replacement Guide

This instruction show you guide on how to replace air heater glow plug screen for Volvo VN truck. Volvo PTT Procedures: 1.Remove the access cover. 2.Disconnect the electrical connections by removing the bolt located on the top of the glow plug. 3.Unscrew the glow plug. Volvo VOCOM 88890300 4.Pull the glow plug strainer out of the glow plug socket with a pair of pliers. 5.Check that the hole for the combustion air is not clogged. If it is clogged, clean it using non detergent 100 % volatile carburator cleaner and an air gun. 6.Slide in the glow plug strainer carefully until it stops. Pay careful attention to the position of the lug and the position of the parting joint. The parting joint,or seam, must face away from the Control Unit.
Post a Comment
Read more