Skip to main content

Volvo EC330B Excavator China GPS Overview

This instruction show on Volvo EC330B Excavator China GPS Overview.

This option is only used in China.Volvo PTT

 Function
- Machine position on real time through GPS based signals
- Anti tempering system (Machine will stop if GPS is removed)
- Machine immobilization (Next engine starting is impossible)
- Machine immobilization (If there is no GSM or GPS signal)
- Machine hour meter information.
- MATRIS information is not available through the China GPS.
Installation
- GPS-ECU unit, Antenna and cable installation by Dealer.
- Base machine production by Volvo.
- China GPS Parameter(MXD) must be turned on by VCAD-pro.
- Anti-thieft protection(ABP) must be turned off by VCAD-pro.
Shut down request from V-ECU
-Power line cut: 60 (Duty ratio output by GPS-ECU)
-GSM cable cut or GPS cable cut: 70
-Open ECU cover: 80
-Stop request from web: 90
-GPS ECU failure: 100
-GPS ECU thift: 0

Volvo PTT Free Download
Engine running condition
-Normal condition: 40 (Duty ratio output by GPS-ECU)
-ECU normal but no GPS signal: 20 (Machine can move tunnel)
-ECU normal but no GSM signal: 30 (Machine can move tunnel)
-Reserved: 50

Labels:

Comments

Post a Comment

Popular posts from this blog

Volvo EC330B Excavator Battery Relay & Safety start Relay

Volvo EC330B Excavator Battery Relay & Safety start Relay Battery relay This is main relay for electric system. Volvo PTT Techtool 2.8.130 The relay turns the battery current ON or OFF, according to low power signals received from the start switch. Use of the relay permits the start switch to control the power of the batteries with a small capacity wire. When you replace this component, pay attention to the +/- signs on the relay. Wrong connection can cause early failure of relay. 2. Safety start relay When trying to restart the engine while the engine is running, or if the start switch is in the START position after the engine is activated, the relay cuts off the current to the starter motor to protect it.
Post a Comment
Read more

Volvo EC330B Excavator Electronic Control System Overview

Volvo ECB330B Excavator Electronic control system overview   Volvo ECB330B Electronic control system is composed of various computers and its communication line. In our system, 2 computer (EECU, VECU) is programmable and 1 computer (MDU) is not. Volvo Tech Tool Communication is important thing to control the machine properly. We use two communication lines that is international protocol. The line is twisted to protect the bus from electrical interference.
Post a Comment
Read more

Volvo EC330B Excavator Engine Start and Stop Circuit Old Overview

Volvo EC330B Excavator Engine Start and Stop Circuit Old Overview  Volvo PTT Procedures: Engine Start and Stop Circuit(Old) Power from battery => electric greasing system,start key,start motor,battery relay Power from battery relay =>safety start relay Vocom 88890300 1) Key ON  BR=> Battery relay,alternator(15,pre-magnetization)  ACC=>VECU,Air conditioner,EMS power relay 2) Key Start  R2=> VECU  C=> safety start relay 3) Engine running  Alternator(L)=>hour meter,safety start relay,VECU(charge lamp off)  * Resistor between alternator and BR termainal for quick charge lamp off  Alternator(B+)=>alternator(BS,voltage sensing for regulation)  Alternator(15)=>battery relay 4) Key Off  VECU(JA61)=>battery relay
Post a Comment
Read more