Skip to main content

Volvo EC330B Excavator Care Track Telematics

Volvo EC330B VCE telematics solution will contain three main services; Mapping and Tracking, Operational Management, and Service Management. Within Mapping and Tracking services such as mapping of machines, geo fence and location report will be included. Operational Management will contain performance and utilization reports. Under Service Management service for the different machines can be planned and followed up. Different alarms and error codes will be handled under service management.

Service
Volvo 88890300
- Machine position
- Instantaneous Machine data
- Geographical fence
- Location report
- Sanil Trail
- Machine Utilization Report
- Event Report
- Performance/Productivity Report
- Immobilizer
- Alarms & Warnings
- Error Codes
- Service Report
- Logged Machine Data, Complete Download
- Logged Machine Data, Partial Download
- Sleep Mode
- Work Shift
- Over the Air Programming 

Volvo Techtool
Picture text: 1. ECU_Wireless for GSM/GPS
2. Satellite modem
3. Antenna connection point for satellite modem
4. Antenna connection point for GSM/GPS

Source:https://volvotruckrepair.blogspot.com

Labels:

Comments

Post a Comment

Popular posts from this blog

Volvo EC330B Excavator Battery Relay & Safety start Relay

Volvo EC330B Excavator Battery Relay & Safety start Relay Battery relay This is main relay for electric system. Volvo PTT Techtool 2.8.130 The relay turns the battery current ON or OFF, according to low power signals received from the start switch. Use of the relay permits the start switch to control the power of the batteries with a small capacity wire. When you replace this component, pay attention to the +/- signs on the relay. Wrong connection can cause early failure of relay. 2. Safety start relay When trying to restart the engine while the engine is running, or if the start switch is in the START position after the engine is activated, the relay cuts off the current to the starter motor to protect it.
Post a Comment
Read more

Volvo EC330B Excavator Electronic Control System Overview

Volvo ECB330B Excavator Electronic control system overview   Volvo ECB330B Electronic control system is composed of various computers and its communication line. In our system, 2 computer (EECU, VECU) is programmable and 1 computer (MDU) is not. Volvo Tech Tool Communication is important thing to control the machine properly. We use two communication lines that is international protocol. The line is twisted to protect the bus from electrical interference.
Post a Comment
Read more

Volvo EC330B Excavator Engine Start and Stop Circuit Old Overview

Volvo EC330B Excavator Engine Start and Stop Circuit Old Overview  Volvo PTT Procedures: Engine Start and Stop Circuit(Old) Power from battery => electric greasing system,start key,start motor,battery relay Power from battery relay =>safety start relay Vocom 88890300 1) Key ON  BR=> Battery relay,alternator(15,pre-magnetization)  ACC=>VECU,Air conditioner,EMS power relay 2) Key Start  R2=> VECU  C=> safety start relay 3) Engine running  Alternator(L)=>hour meter,safety start relay,VECU(charge lamp off)  * Resistor between alternator and BR termainal for quick charge lamp off  Alternator(B+)=>alternator(BS,voltage sensing for regulation)  Alternator(15)=>battery relay 4) Key Off  VECU(JA61)=>battery relay
Post a Comment
Read more